Wednesday, June 2, 2010

Applying Iron on T-Shirt Transfers

An iron T-shirt transfer can turn a plain T-shirt into a really great T-shirt. Follow some easy-to-follow instructions, and the whole process can be really easy, with some really great results.
Here are some really easy instructions to follow

What you will need
Domestic iron 1200w or over
Or
Standard T-SHIRT heat press
DO NOT USE COMMERCIAL STEAM IRON PRESS

How to apply
Preheat iron for about 2 minutes at maximum temperature

DO NOT USE STEAM

Place garment on hard surface DO NOT USE IRONING BOARD

Place image on garment face down

Iron image for at least about 3 minutes.

Move the iron constantly. Ensure all corners and edges are well ironed.

To ensure that you have applied enough time and heat, please make sure that the Green Colour of the iron icon printed on the back side of the transfer have changed to Brown.

This thermal colour is to help you is assessing the heat and time. No green colour Should be left.

Apply pressure

Allow the garment to cool completely before peeling

Peel the transfer from the garment exposing the highly glossy image.

FIXING THE TRANSFER- VERY IMPORTANT
Fix the image by placing an ordinary silicone grease proof paper on the image and re Ironing it for about 15 seconds.

PEEL HOT to skim of the glossy finish and to achieve a mat, flat and thin image on the garment

WASHING
Wash garment 24 hours after being transferred Turn the garment inside out.
Wash the garment in a washing machine using a 40 degrees C (warm wash) wash cycle with a spin dry at the end. A full regular wash cycle.
DO NOT wash as delicate fabric
DO NOT hand wash or leave to soak in a tub
Dry normally in a tumble drier to enhance the longevity of the image

If this makes you want to do your own Iron T-shirt Transfers Then there is no better place to buy your T-shirt transfers than ironontshirt.co.uk.

Article Source: http://EzineArticles.com/?expert=Lee_Bishop

No comments:

Post a Comment

Sponsor Links